New Machinery Regulation (EU) 2023/1230 – What Changes Compared with Directive 2006/42/EC
A guide for machinery manufacturers, machinery users and OSH services.
Regulation (EU) 2023/1230 of the European Parliament and of the Council on machinery is one of the most significant changes to European machinery safety requirements in more than a decade. The new rules will replace the Machinery Directive 2006/42/EC currently in force. The Regulation entered into force on 19 July 2023, but its main provisions will apply from 20 January 2027. This does not mean, however, that all requirements remain unchanged until then. Some provisions of the Regulation have applied since 2024, and further ones have applied since October 2026.
For manufacturers, importers, integrators, maintenance managers and OSH services, this means preparing for the new rules in good time. The following areas take on particular importance: digital documentation, cybersecurity, software related to safety functions, machinery using artificial intelligence and the rules on so-called substantial modification of machinery.
Is this the new Machinery Directive?
In industry practice, the new rules are often referred to as the “new Machinery Directive”, and that is the name people most often search for. Formally, however, this is inaccurate — and the inaccuracy has real consequences. Act 2023/1230 is a regulation, not a directive — and this distinction determines where the applicable requirements are to be found.
A directive is binding on Member States as to the result to be achieved and has to be transposed into national law — which is why, today, a manufacturer in Poland refers to the Polish Regulation of the Minister of Economy of 2008 (the Polish transposition of Directive 2006/42/EC) rather than directly to the text of the Directive itself. An EU regulation, by contrast, applies directly, in identical wording, in every EU Member State. After 20 January 2027, the reference point will therefore no longer be national legislation but the text of Regulation (EU) 2023/1230 itself.
Directive 2006/42/EC will be replaced by a regulation
For many years, Machinery Directive 2006/42/EC has been the basis of the safety requirements for machinery placed on the market and used in the European Union. In Poland, its requirements were transposed by, among others, the Regulation of the Minister of Economy of 21 October 2008 on the essential requirements for machinery.
The new rules take a different legal form. Unlike a directive, an EU regulation does not require transposition into national law. Once it applies, the primary reference point for the requirements for machinery within its scope will be Regulation (EU) 2023/1230 itself, directly and in the same form across the EU.
This does not mean, however, that national machinery safety legislation will disappear entirely. National rules may continue to apply to matters such as the use of machinery, occupational safety and health, market surveillance or other issues outside the scope of the Regulation. What will be reduced is the risk of differences arising from national transposition of the core requirements for placing machinery on the market.
When does the new Regulation start to apply?
For Regulation 2023/1230, a distinction must be made between entry into force and the date of application. The key dates are as follows:
| Date | Meaning |
|---|---|
| 19 July 2023 | entry into force of the Regulation |
| 20 January 2024 | start of application of Articles 26–42 |
| 20 July 2024 | start of application of further specified provisions |
| 20 October 2026 | start of application of further provisions, including those concerning selected mechanisms and procedures |
| 20 January 2027 | general start of application of the Regulation and repeal of Directive 2006/42/EC |
These dates follow from Article 54 of the Regulation and a subsequent corrigendum to its original text. The current version on EUR-Lex confirms 20 January 2027 as the general date of application.
Transitional provisions — important for manufacturers and users
The date of 20 January 2027 does not mean that all machinery in companies has to be reassessed against the new Regulation on that day. The Regulation contains transitional provisions. Member States may not impede the making available on the market of products that were placed on the market in accordance with Directive 2006/42/EC before 20 January 2027.
In practice, this means it will be very important to correctly establish the date on which a given product was placed on the market and to retain documentation proving that it met the requirements in force at that time. The start of application of the Regulation should therefore not be equated with an obligation to “re-register” all existing machinery.
Digital documentation
One of the most noticeable changes is the broader scope for using documentation in digital form. The Regulation allows the instructions for use and certain information and documents relating to the machinery to be provided digitally, while introducing requirements that ensure users have genuine access to this information.
Among other things, the manufacturer must make it possible to access, download and save the instructions, and must meet requirements on keeping the documentation available for a specified period. It is also important to cater for users who need paper documentation. In certain cases, the user or consumer may request the instructions in paper form free of charge. Digitalisation therefore does not mean abandoning paper documentation altogether; rather, it gives manufacturers more flexibility in how they provide it.
Machinery cybersecurity
Regulation 2023/1230 responds far better than Directive 2006/42/EC to the reality of modern, increasingly digitally connected machinery. Its requirements include protecting the machinery against external interference that could create a hazard to health and safety. This applies in particular to software and data related to safety functions.
In practice, this means that when designing a modern machine it is no longer enough to analyse only the classic mechanical, electrical or ergonomic hazards. For machinery equipped with digital systems, the possibility of unauthorised or unintended interference with safety-relevant software must also be taken into account. For manufacturers, this means bringing functional safety and cybersecurity much closer together.
Software as a safety component
One significant change is that the Regulation takes account of the growing importance of software. Under the new legal framework, a safety component no longer has to be a purely physical part of the machine — such as an emergency stop. The Regulation also covers software solutions that perform safety functions. This matters, among others, for manufacturers of machinery that uses:
- programmable controllers,
- safety systems,
- software performing protective functions,
- monitoring and diagnostic systems,
- solutions based on machine learning algorithms.
As a result, the conformity assessment of a modern machine must take into account not only its mechanical design but also the way in which the digital systems responsible for safety operate.
Artificial intelligence and machinery with evolving behaviour
The Regulation takes account of the development of technologies using algorithms that can change how a machine operates over time. Of particular importance are machinery or safety components using solutions with evolving behaviour or logic, i.e. behaviour or logic that may change after being placed on the market, including solutions that use machine learning in safety functions. The key principle, however, remains unchanged: variability in how the system operates must not result in a loss of the level of safety required for the machinery.
In practice, this means such systems have to be properly designed, assessed and controlled. It is also worth bearing in mind that the machinery requirements are coordinated with a separate act on artificial intelligence, the AI Act (Regulation (EU) 2024/1689). A machine or safety component that is an AI system may be subject to both regimes at the same time, and the AI Act has its own, phased application timeline. For projects involving AI, it is therefore necessary to analyse not only the Machinery Regulation but also other relevant EU legislation.
Substantial modification of machinery — one of the most important practical changes
The introduction of a definition of substantial modification is of particular importance for companies with in-house maintenance teams. Until now, the rules on rebuilding or upgrading existing machinery have largely been interpreted on the basis of European Commission documents, guidance, standards and practice. The Regulation introduces clearer rules.
If a modification to a machine is significant enough to affect its compliance with the safety requirements, the party carrying out the modification may be regarded as the manufacturer of the modified machinery and take on the associated obligations. This does not mean, however, that every upgrade, repair or retrofit automatically constitutes a substantial modification. In each case, the following must be assessed, among other things:
- the scope of the changes made,
- the impact of the changes on how the machine functions,
- the emergence of new hazards,
- any increase in existing risk,
- the need for additional protective measures,
- the impact of the modification on the existing conformity assessment.
For companies, this means creating an internal procedure for assessing planned upgrades and rebuilds of machinery. Before carrying out a major retrofit, it is worth answering one question: does the planned change remain an ordinary modification of an existing machine, or could it give rise to manufacturer obligations under the new rules?
High-risk machinery and conformity assessment
The system for certain categories of machinery and related products regarded as particularly hazardous is also changing. Annex I to the Regulation divides the relevant categories into two parts. For certain products, mandatory conformity assessment procedures involving a notified body are required. In some cases, procedures that do not require a notified body remain possible, but this depends on the product category and on meeting the conditions laid down in the Regulation.
For manufacturers, this means re-checking whether their machinery falls into one of the categories subject to special rules. It should not be assumed that the conformity assessment procedure used today will automatically remain available after 20 January 2027.
Obligations of manufacturers, importers and distributors
The Regulation sets out in more detail the obligations of the individual operators in the supply chain. This applies above all to manufacturers, authorised representatives, importers and distributors. Each of them should know what information and documents they must hold, what checks must be carried out before a product is made available on the market and what action must be taken if non-compliance is found.
For importers and distributors, this means that verification procedures carry more weight. It is not enough simply to check whether the machine bears the CE marking. It may also be necessary to verify the relevant documents, the manufacturer’s information and the product identification data.
Directive 2006/42/EC and Regulation 2023/1230 compared
| Area | Directive 2006/42/EC | Regulation 2023/1230 |
|---|---|---|
| Form of legal act | Directive requiring transposition into national law | Regulation applying directly in EU Member States |
| Key date | Currently in force | Generally applicable from 20 January 2027 |
| Scope and definitions | Classic concepts of machinery, partly completed machinery and safety component | Extended and updated scope, plus new definitions |
| Safety components | Mainly technical and physical solutions | Also include certain software solutions |
| Documentation | Traditionally paper documentation | Broader scope for digital documentation |
| Cybersecurity | No specific requirements directly addressing cyber threats | Explicit requirements to protect safety functions against interference |
| AI and machine learning | No specific rules | Covers machinery and safety components with evolving behaviour |
| Substantial modification | No such detailed rules in the text of the Directive itself | Definition and legal consequences of substantial modification introduced |
| High-risk machinery | Annex IV | Annex I, split into two parts, with modified conformity assessment procedures |
| Importers and distributors | Obligations defined to a limited extent | Detailed obligations of operators in the supply chain |
| Transitional provisions | — | Products placed on the market in accordance with 2006/42/EC before 20 January 2027 may continue to be made available |
What does the change mean for maintenance?
In industrial plants, it will be particularly important to put the machinery upgrade process in order. Companies should consider introducing a procedure under which every major intervention in a machine is classified in terms of its impact on safety before work begins. This applies, among other things, to:
- replacing the control system,
- changing the way the machine operates,
- increasing output,
- changing speeds or working forces,
- integrating several machines,
- adding a robot,
- adding new automation systems,
- changing the safety system,
- changing software that performs safety functions.
Not every such change will be a substantial modification. However, each one should be properly analysed and documented.
What does the change mean for OSH services?
For OSH services, the new Regulation means paying closer attention not only to the physical safeguarding of machinery but also to the way it is upgraded and digitalised. It is worth including the following questions in periodic inspections and occupational risk assessment:
- Have the machines been upgraded since the last risk assessment?
- Have design changes been properly documented?
- Could software changes affect safety?
- Are up-to-date instructions available for the machinery?
- Do employees have access to the required information?
- Were upgrades assessed before they were implemented?
- Have changes to the machinery created any new hazards?
In practice, OSH services should work on these matters together with maintenance, automation engineers, design engineers and the people responsible for conformity assessment.
What should you do now?
There is still time before the main provisions start to apply, but preparations should not be left until the last minute. The recommended sequence of actions:
- Inventory — draw up a list of the machinery manufactured, imported, upgraded and used in the company.
- Classification — check which machinery and safety components will be subject to the special procedures under Annex I.
- Documentation — review the technical documentation, instructions, declarations of conformity and conformity assessment procedures.
- Upgrades — introduce a procedure for assessing planned changes for substantial modification.
- Digitalisation and cybersecurity — review how software is managed and how systems affecting safety are protected.
- Training — train design engineers, automation engineers, the people responsible for CE marking, maintenance, quality and OSH services.
- Implementation — before 20 January 2027, adapt the procedures for design, conformity assessment, documentation and placing machinery on the market.







