Chemicals Audit in Poland: What It Covers and How to Prepare
A chemicals audit answers one question: does the company know which substances it has on site, and does it handle them in line with the law? This is not only a matter for chemical plants. Paints, adhesives, solvents, oils, cleaning agents and technical gases are found in almost every workshop, warehouse and production hall. Below we explain what such an audit covers, how it is carried out and what it most often uncovers.
What is a chemicals audit?
A chemicals audit is an independent review of how a company buys, stores, uses and documents chemical substances and mixtures. The auditor compares the actual situation with the requirements of Polish labour law, the REACH and CLP Regulations, and fire safety and environmental regulations.
The starting point is simple. The Polish Labour Code prohibits the use of hazardous substances and mixtures without an up-to-date inventory, safety data sheets and properly labelled packaging. The employer must also assess the risk associated with chemical agents and inform employees about it. In practice, this is where most of the gaps appear.
When is it worth carrying out?
The best moment is before anything has gone wrong. There are, however, situations in which an audit should not be put off:
- an announced or completed inspection by the State Sanitary Inspection (Sanepid) or the National Labour Inspectorate (PIP),
- a new production line, a new process or a change of chemical suppliers,
- an accident, a spill or a near miss involving chemicals,
- carcinogenic, mutagenic or reprotoxic substances (CMR) or diisocyanates appearing on site,
- a customer audit or ISO 45001 or ISO 14001 certification,
- the takeover of a site where nobody can say what is in the warehouse.
What does the auditor check?
The scope depends on the company’s profile, but a full audit covers eight areas.
| Area | What we check |
|---|---|
| Chemicals inventory | Whether there is an up-to-date list of substances and mixtures, and whether it matches what is actually on the shelves and at the workstations |
| Safety data sheets | Whether there is one for every product, in Polish, in the current version and the applicable format; whether employees have access to them |
| Labelling | CLP labels on packaging, labels on secondary containers, tanks, pipelines and storage areas |
| Risk assessment | Whether a risk assessment for chemical agents has been carried out, whether it covers all workstations and whether it leads to specific protective measures |
| Measurements and prevention | Concentration measurements against Polish occupational exposure limits (NDS), registers of harmful agents, referrals for medical examinations listing the chemical agents |
| Special substances | CMR: register of work and workers and the annual report to the inspection authority; diisocyanates: valid training; precursors and restricted substances |
| Storage | Segregation of incompatible substances, spill trays, ventilation, sorbents, fire protection, explosion risk assessment |
| People and procedures | OSH instructions, training, selection of personal protective equipment, spill response, eyewash stations and safety showers |
Companies that place chemicals on the market themselves also need a review of their product documentation: their own safety data sheets, labels, PCN notifications and online shop listings. This part is covered by a separate chemical documentation audit.
How does the audit work?
The audit has four stages and, in a medium-sized plant, does not stop production.
- Document review. Before the visit, we ask for the chemicals inventory, safety data sheets, risk assessment, measurement results and instructions. Gaps are already visible at this stage.
- Site inspection. The auditor walks through the warehouse, production halls, maintenance workshop, laboratory and utility rooms, compares the inventory with reality and looks at packaging, decanting and storage practices.
- Talking to employees. Short questions at the workstations show whether people know what they are working with, where the safety data sheet is and what to do after a spill or splash.
- Report and debrief. The company receives a prioritised list of non-conformities with recommendations. We go through the results with the people responsible, so that every recommendation has an owner and a deadline.
The most common non-conformities
The same problems come up again and again in plants of different sizes and industries.
- The inventory does not keep up with purchasing. The maintenance department buys a new product, and it is added to the inventory a year later or not at all. Aerosols, adhesives, lubricants and service chemicals are the items most often missed.
- Safety data sheets are out of date or incomplete. A safety data sheet has no expiry date, so it is easy to miss that the supplier has issued a newer version. The problem is widespread: in an EU enforcement project run by the ECHA Forum, 35% of the safety data sheets checked did not comply with the regulations. It is one of the first things an inspector checks.
- No risk assessment for chemical agents. Many employers believe that a general occupational risk assessment is enough. However, since 2005 Polish regulations have required a risk assessment specifically for chemical agents.
- Unlabelled secondary containers. Solvent decanted into an old drinks bottle is a classic cause of poisoning and burns.
- Improper storage. Acids next to alkalis, flammable substances near ignition sources, no spill trays and no sorbents.
- Overlooked CMR substances and diisocyanates. The company does not realise that the adhesive, foam or varnish it uses brings additional obligations: a register, an annual report (which can now also be submitted online via e-Sanepid) and training.
- Poorly selected protective equipment. Gloves and half masks bought as “universal”, without checking in the safety data sheet what they are supposed to protect against.
Most of these shortcomings can be fixed quickly and at little cost. There is one condition: you need to know about them before the inspector does.
What does the company get after the audit?
The result is a report that can actually be implemented, not just filed away in a binder. It contains a list of non-conformities with their legal basis, an assessment of their severity, corrective recommendations and a proposed order of actions. On request, we also prepare a structured chemicals inventory, which becomes the basis for managing the topic going forward.
The benefits go beyond compliance. A structured inventory usually reveals duplicated, expired and unused products, which reduces purchasing and disposal costs. It also often turns out that a CMR substance can be replaced with a safer alternative, removing the obligations that come with it.
How to prepare
Before the audit, it is worth doing three things:
- Gather the safety data sheets you have and your existing inventory in one place, even if it is incomplete.
- Appoint a person who knows the site and can show the auditor every place where chemicals are kept. This includes workshop cabinets and the cleaning contractor’s storerooms.
- Let employees know that the audit is not an inspection: it is there to catch problems, not to find someone to blame.
There is no need to tidy anything up “for show”. The audit should show the real situation, because only then will the recommendations be accurate.
Find out what is really in your warehouse
At EHS Consulting we carry out a chemicals audit that combines two perspectives: occupational safety and chemical product documentation. As a result, a single review covers both the workstations and the warehouse, and the safety data sheets, labels and PCN notifications.
Would you like to know where to start in your company? Email us at biuro@ehsconsulting.pl or call +48 732 228 853.
Sources
- Polish Labour Code – Article 221 (hazardous substances and mixtures), in Polish
- Regulation of the Minister of Health of 30 December 2004 on occupational health and safety related to the presence of chemical agents in the workplace (Dz.U. 2005 No. 11, item 86), in Polish
- ECHA: Compliance of safety data sheets – still room for improvement (December 2024)







